We know that after getting your X1, you are eager to start a print on it and see it in action. So we included a few pre-sliced models that you can print.
¶ Printing a pre-loaded file
¶ Video Guide
In the video example, we are showing you how to print the scraper which requires a single color, but if you plan to print with multiple colors, ensure that you loaded different color spools in the AMS.
¶ Ensure that filament is loaded in the printer.
You can check this wiki page for step-by-step information on how to load filament to the X1.
¶ Touch the folder icon and select one of the models you want to print
¶ Enable all calibration options for the best results.
¶ Touch the Print Now button to start the print.
