While the Bambu Lab Plate is designed for durability, it is still a consumable part. After extensive use, if it gets damaged, you may need to replace it. Here's how to do it:
The model shown in the video can be downloaded and printed from here
To remove the Bambu Lab Plate sheet, simply peel one of the corners and gently pull it off the printing surface. The sharp scraper blade can help you start the peel on one of the corners.
While the printing surface should be prepared for attaching the new Plate sheet, we recommend wiping the surface quickly with warm water and regular soap. This ensures the printing surface is clean, and the sticker will have excellent adhesion during use.
Additionally, washing your hands before applying the sheet is recommended to ensure no grease is present, providing the sticker with the best chance to adhere perfectly.
Before applying the Plate sheet, align the sticker to the corners of the plate and secure it in place by using two pieces of tape on the top of the sheet.
Next, lift the Plate sheet and peel the side closest to the tape to start the application process.
When applying the Plate sheet, exert uniform pressure in a sliding motion over the sheet while continuing to remove the sticker protection. This ensures no air bubbles are trapped underneath the sticker.
Take your time, and don't rush this process. Slow and steady wins the race and will ensure a good application of the Plate sheet.
The application of the sheet is complete, but for best results, we also recommend heating up the flex plate with the sticker applied for a few minutes.
Take the printing surface and place it on the heated bed of the machine with the Plate sheet facing the heated bed.
Set the temperature of the bed to 60°C and wait for about 5 minutes.