¶ Observation
Under the drive of AMS, the filament is delivered to the toolhead through multiple sections of Teflon tubes. During the transportation process, various sensors detect whether the filament passes through. This alarm is triggered when the printer finds that the sensor cannot always detect the filament.
¶ Troubleshooting
¶ Tools, Equipment, and Materials
- None
¶ Actions
You can try feeding or re-initiating printing to check whether the filament can be delivered to the toolhead. If the filament comes out from the interface, please reconnect the AMS to the buffer, buffer to the printer back, and printer back to the toolhead, ensuring that the Teflon tube is inserted into the pneumatic connector.
If the issue persists after troubleshooting, please submit a customer support ticket.
¶ Equivalent Codes
The following HMS codes represent the same type of fault.
0700-2000-0002-0006
0701-2000-0002-0006
0702-2000-0002-0006
0703-2000-0002-0006
¶ End Notes
We hope that the detailed guide we shared with you was helpful and informative.
We want to ensure that you can perform it safely and effectively. If you have any concerns or questions regarding the process described in this article, we encourage you to reach out to our friendly customer service team before starting the operation. Our team is always ready to help you and answer any questions you may have.
Click here to open a new ticket in our Support Page.
We will do our best to respond promptly and provide you with the assistance you need.