¶ Applicable models of printers
X1 Series
¶ When to use?
When you encounter an abnormal noise from the chamber temperature regulator fan, after assessment by customer service, it is determined that a magnet needs to be installed for repair.
¶ Tools and materials needed
- A magnet (Please contact after-sales)
- H1.5 and H2.0 Allen key
- Tweezer
¶ Safety warning
Important!
Before starting operation, please make sure the machine is turned off.
If AMS is connected, you need to remove the PTFE tube and filament buffer first.
¶ Video Guide
¶ Installation Guide
¶ Remove the rear cover
- Loosen the screws at the back of the printer. There are a total of 14 screws to be undone—10 in the first image and 4 in the second image, as indicated below.
 |
 |
- Remove the PTFE tube coupler.
- To remove the rear cover, start by pulling the left side to prevent interference with the left belt tension port, and then proceed to the right side. Push the PTFE tube outlet inwards to release it from the cover.
 |
 |
¶ Install the magnet
- Tear off the sticker in the middle of the fan.
- Tear off the sticker of the new foam and magnet.
 |
 |
- Attach the new foam and magnet to the middle of the fan.
¶ Install the rear cover
- Start by passing through the tube bracket, then secure the right side of the rear cover beyond the right belt tensioner, as shown below. Follow this by securing it past the left belt tensioner.
|
|
- Screw the rear cover back on, paying attention to the different types of screws (10 and 4) as pointed out earlier.
|
|
Note: If this does not work, replacing the fan could be a solution. Please click Chamber Temperature Regulator Fan Replacement Guide for more related information.
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
To ensure a safe and effective execution, if you have any concerns or questions about the process described in this article, we recommend submitting a technical ticket regarding your issue. Please include a picture or video illustrating the problem, as well as any additional information related to your inquiry.