Please note that this function will only load filament on the external spool. If you want to load filaments in the AMS, you can just start a print in Bambu Studio or Bambu Handy, and you should be able to choose what filaments in the AMS to use. But first, you need to load them to the AMS.
1. Place filament in the AMS.
2. Insert filament to the first-stage feeder.
3. Start a print in Bambu Studio/Bambu Handy by selecting the loaded filament.
Bambu Studio
Bambu Handy
¶ 3. Wait till the nozzle heats up to 250 ℃; Manually push the filament on the back.
