¶ Print Model Selection
Recommended Parameter Settings
¶ Hueforge 1: Blue Printing Kit
Drying requirements for filament before and during use*: Recommended drying before use and drying protection during use to improve print quality.
Guideline for filament, printers and accessories
|
Filament |
Printer |
Plate* |
Glue Stick Requirement |
Bed Temperature / ℃ |
Other Requirements |
Recommended .3mf Model Files |
|
1. PLA Matte Charcoal 2. PLA Basic Blue 3. PLA Basic Cyan 4. PLA Basic Jade White |
X1C |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or ) remove top cover* |
blue-x1c-Textured PEI Plate.3mf |
|
Cool Plate |
Required |
35 |
/ |
blue-x1c-Cool Plate.3mf | ||
|
X1 |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
blue-x1-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
blue-x1-Cool Plate.3mf | ||
|
X1E |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
blue-x1e-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
blue-x1e-Cool Plate.3mf | ||
|
P1S |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
blue-p1s-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
blue-p1s-Cool Plate.3mf | ||
|
P1P |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
Open the front door and (or) remove top cover |
blue-p1p-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
blue-p1p-Cool Plate.3mf | ||
|
A1 mini |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
/ |
blue_a1mini-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
blue-a1mini-Cool Plate.3mf |
Please Note:
- Printing with filaments that are not dry enough results in poor print quality.
- Printing with a High-Temperature Plate may result in filament sticking nozzle, stringing and oozing, leading to the unclear top surface of the model.
- When using the enclosed printer with a bed temperature higher than 45 ℃, it is recommended to open the front door and/or remove the top cover for cooling to avoid the extrusion gear from becoming stuck.
- Certain small parts of the model are not detailed enough due to the limitations of the printer, filaments, parameter settings, etc.
¶ Hueforge 2: Red Printing Kit
Drying requirements for filament before and during use*: Recommended drying before use and drying protection during use to improve print quality.
Guideline for Filament, Printers and their Accessories
|
Filament |
Drying requirements for filament before and during use |
Printer |
Plate |
Glue Stick Required? |
Bed Temperature/ ℃ |
Other Requirements |
Recommended .3mf Model Files |
|
1. PLA Matte Charcoal 2. PLA Basic Red 3. PLA Matte Scarlet Red 4. PLA Basic Jade White |
Recommended drying before use and drying protection during use to improve print quality. |
X1C |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
red-x1c-Textured PEI Plate.3mf |
|
Cool Plate |
Required |
35 |
/ |
red-x1c-Cool Plate.3mf | |||
|
X1 |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
red-x1-Textured PEI Plate.3mf | ||
|
Cool Plate |
Required |
35 |
/ |
red-x1-Cool Plate.3mf | |||
|
X1E |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
red-x1e-Textured PEI Plate.3mf | ||
|
Cool Plate |
Required |
35 |
/ |
red-x1e-Cool Plate.3mf | |||
|
P1S |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
red-p1s-Textured PEI Plate.3mf | ||
|
Cool Plate |
Required |
35 |
/ |
red-p1s-Cool Plate.3mf | |||
|
P1P |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
Open the front door and (or) remove top cover |
red-p1p-Textured PEI Plate.3mf | ||
|
Cool Plate |
Required |
35 |
/ |
red-p1p-Cool Plate.3mf | |||
|
A1 mini |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
/ |
red-a1mini-Textured PEI Plate.3mf | ||
|
Cool Plate |
Required |
35 |
/ |
red-a1mini-Cool Plate.3mf |
¶ Hueforge 3: Green Printing Kit
Drying requirements for filament before and during use*: Recommended drying before use and drying protection during use to improve print quality.
Guideline for Filament, Printers and their Accessories
|
Filament |
Printer |
Plate |
Glue Stick Required? |
Bed Temperature/ ℃ |
Other Requirements |
Recommended .3mf Model Files |
|
1. PLA Matte Charcoal 2. PLA Basic Green 3. PLA Basic Bambu Green 4. PLA Basic Jade White |
X1C |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
green-x1c-Textured PEI Plate.3mf |
|
Cool Plate |
Required |
35 |
/ |
green-x1c-Cool Plate.3mf | ||
| X1 |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
green-x1-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
green-x1-Cool Plate.3mf | ||
| X1E |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
green-x1e-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
green-x1e-Cool Plate.3mf | ||
| P1S |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
green-p1s-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
green-p1s-Cool Plate.3mf | ||
| P1P |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
Open the front door and (or) remove top cover |
green-p1p-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
green-p1p-Cool Plate.3mf | ||
| A1 mini |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
/ |
green-a1mini-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
green-a1mini-Cool Plate.3mf |
¶ Hueforge 4: Yellow Printing Kit
Drying requirements for filament before and during use*: Recommended drying before use and drying protection during use to improve print quality.
Guideline for Filament, Printers and their Accessories
|
Filament |
Printer |
Plate |
Glue Stick Required? |
Bed Temperature/ ℃ |
Other Requirements |
Recommended .3mf Model Files |
|
1. PLA Matte Charcoal 2. PLA Basic Yellow 3. PLA Basic Orange 4. PLA Basic Jade White |
X1C |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
yellow-x1c-Textured PEI Plate.3mf |
|
Cool Plate |
Required |
35 |
/ |
yellow-x1c-Cool Plate.3mf | ||
|
X1 |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
yellow-x1-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
yellow-x1-Cool Plate.3mf | ||
|
X1E |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
yellow-x1e-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
yellow-x1e-Cool Plate.3mf | ||
|
P1S |
Textured PEI Plate |
Recommended |
55 |
Open the front door and (or) remove top cover |
yellow-p1s-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
yellow-p1s-Cool Plate.3mf | ||
|
P1P |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
Open the front door and (or) remove top cover |
yellow-p1p-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
yellow-p1p-Cool Plate.3mf | ||
|
A1 mini |
Textured PEI Plate |
Recommended |
first layer: 70 other layers: 60 |
/ |
yellow-a1mini-Textured PEI Plate.3mf | |
|
Cool Plate |
Required |
35 |
/ |
yellow-a1mini-Cool Plate.3mf |
¶ Steps for the Operation
¶ 1. Open the project
¶ 2. Select your 3mf file
¶ 3. Special parameter confirmation
(1) Adjust the min layer height to 0.04 mm.
(2) Check if filament parameters match the opened 3mf. (compare suffixes for confirmation)
(3) Confirm specific process parameters
¶ Filament placement in AMS slot
Ensure that the placement of the filament in the AMS slot matches the sequential number of the filament setting in Bambu Studio to avoid printing incorrect colors.
¶ Slice Plate Preview
When slicing with Bambu Studio, make sure that the serial number of the filament matches the placement of the filament color in the AMS slot. After slicing, please also verify the color of the printing is correct.
¶ Actual printing pictures
